Past Work
A selection of completed projects — spanning industrial repair, precision machining, structural fabrication, and additive manufacturing.
Stainless Pump Housing Repair
Water Treatment Facility, South Florida
Emergency repair of a cracked 316L stainless centrifugal pump volute. Weld repair, post-weld heat treatment, and re-machining of sealing surfaces to OEM tolerance restored the unit to service within 48 hours.
Aluminum Marine Davit Frame
Commercial Marine Operator, Miami
5052-H32 aluminum tube-and-plate davit system for a 65-foot commercial vessel. Designed from load calculations, TIG-welded, and powder-coat-primed for saltwater service.
Steel Equipment Mezzanine
Distribution Center, Doral FL
A36 structural steel mezzanine platform, 24 ft × 16 ft, with diamond-plate treads, W-beam stair stringer, cable rail perimeter, and column base plates. AWS D1.1 welded and AISC-compliant.
Precision Aerospace Bracket
Aerospace OEM (NDA)
Series of 7075-T6 aluminum machined brackets for an avionics mounting system. Tolerances to ±0.0005″ on critical bore features, CMM-verified with first-article inspection report.
3D-Printed Weld Fixtures
Internal / Production
PA12-CF printed fixture set for holding tube assemblies during MIG welding. Replaced expensive machined fixtures at 10× lower cost. Dimensional stability confirmed over 200+ use cycles.
Stainless Sanitary Tank
Food Processing Plant, Hialeah FL
150-gallon 316L sanitary mixing tank with tri-clamp fittings, polished interior (Ra ≤ 32 μin), sloped bottom for full drainage, and ASME BPE-compliant welds.
Have a Similar Project?
Submit your specs and get a quote from our engineering team within one business day.
Request a Quote →